DESCRIPTION

The Dillin Capping Systems: Model 59-300 Single Head Capper applies metal or plastic closures to class containers. It is used for laboratory, experiment, test pack or where small quantities of products such as baby food, vegetables, fruits, orange juice, jams/jellies, salsas, spaghetti sauce, ect. Must be packed under steam vacuum.

OPERATION

First, the filled container, with the cap lying loosely on the finish, is manually placed on the table. Then the container is clamped against the guides with the toggle clamp. A magnet is lowered by pressing down on the knob at the top of the machine. The magnet picks up the cap and raises it up into the head steam zone. The table is raised by means of a cam and handle located on the front of the machine. The container is raised up to the head and into contact with the cap. The rotating rubber chuck applies and tightens the cap. (Note: Torque can be adjusted by the head load springs.) A push cap can be applied if the motor is not utilized. Finally, the table is lowered and the capper container is removed.

FEATURES

Applies continuous thread, lug caps, & push-on caps
Compact, free-standing unit
Self-contained motorized unit
Convenient bench mount
Flexible hose provided for steam
Small enough for laboratory use
Can plug in any 110V outlet
Convenient for capping small quantities of product

AVAILABLE ACCESSORIES

10-15 Containers per minute (Depending on speed of operator)
1.00”-6.25” Diameter Container
2.00”-10.50” Tall Container
47mm – 83mm Cap Size
100PSI Steam Pressure line required